Newsgroups: rec.radio.amateur.misc
From: little
Subject: Re:Mods for ft726r to do 9600
Organization: Digital Equipment Corporation
Date: Wed, 12 May 1993 20:32:28 GMT
Lines:19
From James Miller G3RUH:
Inject your modem TXaudio directly to the transmitter varactor in the
SAT unit via J04 pin 2.
1. Remove the main lid; remove the SAT unit lid.
2. Locate J04 which is a 3 wire connector in the front left-hand corner.
3. Unplug J04, and inject your audio on pin 2, ground on pin 1, using a
screened cable.
This is of course assuming you are using a G3RUH or K9NG 9600 baud FSK
modems. The receive side needs to come straight from the discriminator
which I haven't had a chance to locate yet. Perhaps if someone else
has the necessary hook up information for the receive side, they could
post it here.
73,
Todd
N9MWB
SOURCE: The QRZ Windows Ham Radio CDROM |