R.S. HTX-245 MOD
CAUTION MODIFICATION TO RADIO WILL VOID WARRANTY
this mod is for the new dual band HT from radioshack cat#19-1106
out of the box the radio will go from 144-148 rx/tx and 438-450 rx/tx
the mod will rx and tx from 136-174 and 420-470
1. remove screws from back cover and battery compartment
2. remove nuts on volume and antenna jaack
3. unsolder speaker connections
4. carefully remove entire circuitry from shell
5. the smaller circuit board will un plug from main board
6. towards the middle top of the large circuit board their is a black
square processor chip. to the left corner their are 2 solder pad jumpers
that are facing vertical in comparison with the board. to extend rx
remove bridge
closest to right side. (the left jumper will only allow 144-146 and
430-440 tx/rxonly)
7. to exend transmit unsolder the other pad that is horizontal in comparison
to main
board. (if MARS/CAP is wanted just remove the horizontal jumper and
leave other
alone.140-149rx/tx)
8.reassemble radio
9. reset radio by pressing (MF) and (6) key while powering on.
----------------update---------------------------------------------------
Date: Tue, 15 Aug 2000 13:14:12 -0500
Subject: HTX-245
From: Gregory H Watson
SOURCE: The QRZ Windows Ham Radio CDROM |