HOMEPAGE | THE WORLD OF FREE PACKET RADIO SOFTWARE AMSTERDAM THE NETHERLANDS |
From: Dan Asbjornsen the KB7UXE Subject: Icom IC-736 Modification. 01. Remove power, antennas etc. 02. Turn rig upside down with front of rig facing away from you, remove bottom cover. 03. Looking at the back side of the front panel logic board just to the side of center, along the bottom actually now at the top you'll see diode D15, this is a typical non surface mount glass diode. 04. Clip this diode. 05. Reassemble The Rig. 06. You have the modification complete. Not responcible for errors on your part. 73 's Dan Asbjornsen The KB7UXE |